I am using the 0.1Beta2 MINI version of Geexbox.
I've changed the settings in the /etc/network file as listed here:
Code: Select all
# System's Network Configuration
PHY_TYPE="auto" # Network physical type (auto|ethernet|wifi)
HOST="" # GeeXboX IP ("" for DHCP)
SUBNET="" # GeeXboX Subnet mask ("" for DHCP)
GATEWAY="" # Gateway IP ("" for DHCP or no internet connection)
DNS_SERVER="" # DNS Server IP ("" for DHCP or none)
DHCP_TIMEOUT="0" # DHCP timeout seconds (set >0 for slow servers)
ETH="" # set interface in case it's not eth0
# Wifi settings
WIFI_MODE="managed" # Wifi working mode (managed|ad-hoc)
WIFI_CHANNEL="10" # Wifi channel
WIFI_ENC="WEP" # Wifi Encryption method (WEP|WPA|none)
WIFI_KEY="MYWEPKEY" # Wifi WEP/WPA key (in ASCII mode, not hex.)
WIFI_ESSID="MYSSID" # Wifi SSID
#WPA_DRV="wext" # WPA driver (wext|atmel)
#WPA_SCAN_SSID="1" # Request SSID-specific scanning; for APs that
# reject broadcast SSID (0|1)
#WPA_AP_SCAN="2" # Driver AP scanning method (0|1|2)
#WPA_CIPHER="CCMP TKIP" # WPA CIPHER to use (CCMP|TKIP|none)
Am I missing something?
When I run in debug mode, it there a command I can run to check my network settings?
Thank you.